spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 1 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195 t-1 (3mm) solid state lamp part number: WP710A10CGCK green features z low power consumption. z popular t-1 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. description the green source color devices are made with algainp on gaas substrate light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 2 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. 3. wavelength value is traceable to the cie127-2007 compliant national standards. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 WP710A10CGCK green (algainp) water clear 150 330 34 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength green 574 nm i f =20ma d [1] dominant wavelength green 570 nm i f =20ma ? 1/2 spectral line half-width green 20 nm i f =20ma c capacitance green 15 pf v f =0v;f=1mhz v f [2] forward voltage green 2.1 2.5 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 75 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 3 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195 green WP710A10CGCK
spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 4 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195 packing & label specifications WP710A10CGCK
spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 5 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195
spec no: dsal0495 rev no: v.4b date: mar/20/2013 page: 6 of 6 approved: wynec checked: allen liu drawn: f.cui erp: 1101029195 all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: kingbright: ? WP710A10CGCK
|
